⎝⎛炸金花⎞⎠

Welcome to the official website of Zibo Jinrun Environmental Protection Technology Co., Ltd.!

Zibo Jinrun Environmental Protection Technology Co., Ltd.

Zibo Jinrun Environmental Protection Technology Co., Ltd.

Professional research and development, design, production and sales of environmental protection equipment such as fans, dust collectors, desulfurization and denitrification

National consultation hotline: 0533-6060016
132 8700 8277

How to maintain the bearings and impellers of tunnel jet fans?

发表时间:2020-01-14 Article Source: Zibo Jinrun Environmental Protection Technology Co. , Ltd.Published time: 2020-01-14

<b> SDSå ° åž ‹éš§é" å ° „æµ é £ Žæœº </ b>

Tunnel jet fan

Because the fan impellers and bearings of tunnel jet fans are the most easily damaged, today the editor of tunnel jet fans simply explains how to maintain them.

1. If the impeller is maintained during the initial phase of operation, and the impeller is maintained during all maintenance periods, if there is an opportunity to call, the impeller will have cracks, damage, dirt and other defects from start to finish. Before the misadjustment, it is indispensable to check whether all the tightening nuts are tightened. Impellers should be kept as pickled as possible, and the dust and rust of the impeller should be brushed with stainless steel wire on time. When the running time becomes longer, the blades do not evenly diverge and are already on the impeller, forming the balance of the high-pressure water jet suction filter impeller of the tunnel and the rotor vibration. When the impeller has already been trimmed, it should be out of adjustment again. The impeller has not been out of order for a while, and the department nut can fall off. If the geographical environment is willing, being able to use a portable application offset device has already stopped the offset on the spot.

2. It should stop when it has been replaced. If it is helpless to ensure this small half, it can be prescribed to replace with new sealed sand and gravel. Bearing medical often checks bearing smooth oil. The first oil change time should be stopped within about 200 days after the operation process. If the cabinet leaks oil, the bearing end cap nut can be tightened. His will be checked once a week. When everything is smooth, the bearing oil is replaced once every six months. When the smooth oil of the tunnel jet fan is not successful, the daily task of changing the oil can be widened from February to April. Using the named smoothing agent, new unsalted butter has been added in advance, and the old unsalted butter is marinated into the fuel tank.

隧道射流风机 Keywords in this article: Tunnel Jet Fan

返回顶部

欢乐拼三张 七乐彩 欢乐拼三张 真人游戏平台注册